So your property is experiencing creaky floor syndrome and you don’t know how to proceed! Creaking floors can be very irritating, especially once you walk in it during the night to attend the bathroom. But there is no need to worry since it is fairly possible to rectify this problem. Through the use of some simple methods with minimal investment, you are able to eliminate the origin of the creaks and have a peaceful night’s sleep once again.
The main thing is to recognize the main cause of the creaks before fixing it permanently. There may be several reasons for the floors to squeak. One reason being the wood becoming dry and shrinking, which can create small gaps between the boards. Most modern homes contain flooring that is made up of several timber layers. Over a time period, the joists start sagging and become noisy.
The easiest option should be to sprinkle a handful of talcum powder along the joints of the boards. You must then cover the powder with a document towel and step on the wooden board to allow powder work its way through the seam. Talcum powder will lubricate the outer dielen kaufen lining of the floorboards and stops them from creaking. It’s also possible to use this method for small gaps and cracks.
When you can still hear a squeaky noise whenever walking on the wooden floorboards, it might be advisable to nail the board to the layer underneath it. However it is much better to make use of small screws as opposed to nails as they will hold better. End the task through the use of some wood filler to cover the patch.
If your floorboards are old, take a sort and bang it on the screwed patches. If that doesn’t work, install another screw near the previous one for added stability and strength. But sometimes, even after you have added extra nails and screws into a floor, the irritating noise still continues.
If you can’t get under-stair access, start with determining the riser’s position, and then draw a pen line along it. Drill 100 mm holes on the line and then drive the screws in. Use an adhesive to cover the timber plugs to cover the screws. When the adhesive has dried, cut off the top of the plug with a chisel before sanding it.
However if you will get under-stair access, you must check every the main floorboard separately to learn where in fact the noise is coming from. By investigating the floorboards, we mean removing an entire element of a floor to find loose parts. It’s to be performed if you intend to get to the main cause of the creaks. If you believe this job is away from capability, it is much better to get assistance from professionals. Like that, you will have minimal injury to the floorboards, and you can get the result you are looking for.