Screen Printing Tips: Useful Information On Silk Screening White-Colored Ink And Screen Print Technique

It appears that probably the most common problems new screen printers encounter is printing white-colored ink. I have heard lots of questions like: So why do my other colors print fine and white-colored is really tough? Why do my white-colored ink is really thick? Why can’t I receive an even white-colored ink? It certainly is rough and appears to possess texture into it. Can there be anything I’m able to do in order to thin my white-colored ink to really make it simpler to print? Also comments like: “Our white-colored ink isn’t good, it comes down off after only a few washes.” “There is something wrong with my press, it prints fine after i am printing on white-colored shirts, however when I print on dark shirts the white-colored ink is extremely fuzzy.”

Regrettably, the solutions to those quarries usually lie within the printer themselves. No, your white-colored ink is not defecting, your press most likely works fine, and also you should not have to thin a lot of it. Yes, you most likely have to change some variables and methods throughout the printing process. The reality from the mater is, the reply is within the question all along.

Why will the screen printing process work fine for some time after which once you start printing white-colored ink, smash, a road block. The simple truth is, you might have been doing the incorrect things whole time, it simply did not appear yet custom shirts. It’s like swimming, sure you are able to dog paddle and flounder round the pool all day long. However, with regards to swimming a lengthy distance, with no proper techniques you’ll work two times as hard and obtain half as far.

Printing on light clothes is a lot simpler than printing white-colored on dark clothes. On the light outfit, much less ink is needed to attain good coverage. Also many occasions you are dealing with thinner inks. Ink varies in viscosity based on just how much pigment it’s inside it. For example, a black and white is nearly always likely to be printed on lighter colors, the pigments required for the black to appear are significantly less then your pigments required for a white-colored ink to pay for a dark outfit. Thus, you are black and white is a lot thinner and simpler to utilize. That you can do nearly every technique wrong when printing black and white on the white-colored shirt, and there is still a strong possibility that one last print will appear very good.

So essentially when establishing a screen printing job that needs black and white on the white-colored shirt, you should use the incorrect screen mesh, don’t have any off contact, and print using the drastically wrong squeegee technique but still have an “OK” searching final print. However, if the wrong techniques are attempted when printing white-colored ink, uh oh, game over! The unfortunate factor is, many printers begin by doing this and educate themselves drastically wrong. Actually, this is the way I learned. It isn’t the finish around the globe though!

Leave a Reply

Comment
Name*
Mail*
Website*